GE General Electric Roper Hotpoint Gas Oven Stove Flat Ignitor Igniter WB2X9697
This igniter's amperage range is 3.3 - 3.6. Used with 3.2 to 3.5 amp rated gas safety valves. Includes: high temperature stainless steel shield high temperature MGT wire leads and high temperature ceramic wire nuts to wire into original harness. Replaces long and short ignitors. Be careful not to drop your new ignitor; ignitors are fragile and will break easily.
GE General Electric Hotpoint RCA Sears Kenmore
The oven igniter, also called a glow bar, heats up the bimetal switch and causes the oven to ignite the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor. Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn't ignite the burner tube.
REPLACES PART NUMBERS:
WB2X9697 WB2X7954 WB2X4827 WB02X9697 WB02X7954 WB02X4827 4337848 336650
USED ON MODELS:
B4157X0 B445710 B4457B0 B6307B1 B6307X0 JGBP24GEF1 JGBP28GEL JGBP28GEL2 JGHP66GEN1 JGHP66GEN2 JGHP66GEN3 JGHP66GEN4 JGHP66GEN5 JGHP66GEN7 JGRC16GEL1 JGRC16GEL2 JGRC16GEL3 JGRC16GEL4 JGRS15GEL1 JGRS15GEL2 JGRS15GEL3 JGRS15GEL4 L2J120EL0 RGB524EJ1 RGB524EJ2 RGB524EJ3 RGB528EJ1 RGB528EJ2 RGB528EJ3 RGB528GEJ1 RGB528GEJ2 RGB528GEJ3 RGB628GEJ1 RGB628GEJ2 RGB628GEJ3 RGJ515GEL1 RGJ515GEL2 RGJ515GEL3 RGJ515GEL4 RGJ616GEL1 RGJ616GEL2 RGJ616GEL3 RGJ616GEL4 RGS525GEJ1 RGS525GEJ2 RGS525GEJ3